Uluslararası Evden Eve Nakliyat Firması Seçerken Nelere Dikkat Edilmeli?

Edit setfor Uluslararası Evden Eve Nakliyat Firması Seçerken Nelere Dikkat Edilmeli?

Uluslararası evden eve nakliyat fiyatları taşınılan ülkeden ülkeye göre değişmektedir. Çünkü her ülkenin gümrük fiyatları farklılık göstermektedir. Bu ise uluslararası eşya taşımacılığı fiyatlarında değişken bir etki göstermektedir. Bunun yanı sıra taşıma şekli de uluslararası evden eve nakliye fiyatını etkiler. Karayolu, havayolu veya denizyolu lojistik fiyatları farklıdır. Ayrıca eşyanın ne kadar çok olduğu da uluslararası eşya taşımacılığı için çok önem taşıyor. Ürünlerin hacmi hesaplanıyor ve hangi boyda kaç araca ihtiyaç olduğu belirleniyor. Yani evden eve nakliyat için fiyat belirlemedeki en büyük husus eşyaların ölçümü oluyor. Bunun birlikte eşyaların hangi dönemde taşınacağı da fiyatı etkiliyor. Çünkü uluslararası eşya taşımacılığı fiyatlarında dönemsel olarak yoğunluk fiyatlarda artışa neden oluyor.

Uluslararası evden eve nakliyat için fiyat teklifleri de bu aşamada konuşuluyor. Lojistik fiyatları eşyaların ulaşacağı ülkelere göre, eşyaların hassasiyetine ve miktarına göre değişiklik gösteriyor. Uluslararası eşya taşımacılığı konusunda uzman olan personeller müşterinin aklına takılan her soruyu cevaplıyor. 

Evde eve nakliyat çözümleriniz için güvenilir bir firma arıyorsanız; interlojistik sektörün önde gelen isimlerinden biridir.

The new 5G and massive MIMO are everywhere. What can the 5G massive MIMO bring to our life?

With the continuous progress of information technology, digitalization, and big data, the development of antenna technology also has higher requirements, and the communication system keeps developing to the higher frequency band and larger bandwidth.

Looking back to the radio communication technology, from the 1895 Italian scientist Marconi, the first wireless telegram is filled with the other side of the ocean. It has already passed more than 120 years in social life, aerospace, military, etc. Radio communications technology has played an irreplaceable role.

(.pdf, 343K | Downloaded 5 times)

What is the ISM band and what are the main frequencies in the ISM band? After the read, you will get the answer.

This frequency range for 430.050 ~ 434.790MHz, in the world range.

This frequency range is from 868 to 870 MHz, in the UHF band. 

ISM Band Frequency 915 MHz

In the United States and Australia, the frequency range 888 to 889 MHz and 902 to 928 MHz has been available and used by the backscatter RFID system.

ISM Band Frequency 2.4 GHz

This ISM band frequency range is 2.400 ~ 2.483GHz, belongs to the microwave band.

ISM applications in this band include Bluetooth and 802.11 protocol wireless networks.

Microwave / Bluetooth / WIFI, etc. are used in this frequency, in addition to domestic RFID also uses this frequency.

ISM Band Frequency 5.8GHz

This ISM frequency range is 5.725 ~ 5.875GHz.

(.pdf, 343K | Downloaded 5 times)

Lora Wireless Communication

Edit setfor Lora Wireless Communication

Lora wireless communication technology is Long Range Radio wireless communication technology. It is a low-power LAN wireless standard created by Semtech company. Its biggest feature is that it can travel farther than other wireless methods under the same power consumption condition, achieving low power consumption and Long-distance unity, it is 3-5 times longer than the traditional radio frequency communication distance under the same power consumption.

Working frequency: ISM frequency band, including 433 MHz, 868 MHz, 915 MHz, etc.

Today, we talk about the several major benefits of NFC smart homes. Guess what are the benefits of NFC smart homes?

For applications in the era of interconnected smart homes, NFC technology can increase the ease of use, safety, etc. of equipment, and can greatly change the lifestyle of our daily homes.

As a short-field communication technology, NFC has a very wide range of applications, such as mobile payment, channel inspection, automobiles, smart homes, industrial control, and so on. With the continuous evolution of smart home scenarios, a large part of NFC devices will appear in the living room in the future.

 

 

 

 

 

 

 

 

 

Plant Protein Powder

 

 

 

(.pdf, 350K | Downloaded 6 times)

LoRa vs ZigBee

Edit setfor LoRa vs ZigBee

After the read, you will learn about what are the differences between Lora vs Zigbee.

At present, LoRa mainly operates in free frequency bands around the world, including 433MHz, 868MHz, 915MHz, and so on. The main frequency band in China is 470MHz, 902-928MHz in other parts of Asia, 868 MHz in Europe, and 915 MHz in America.

Sarkari Exam

Today, we talk about the 5G NR technology and the 6 Characteristics of 5G NR Technology.

What is 5G NR technology?

The 5th generation mobile networks or 5th generation wireless systems, 5th-Generation, referred to as 5G or 5G NR technology is the latest generation of cellular mobile communication technology, namely 4G (LTE-A, WiMax), 3G ( Extension after UMTS, LTE) and 2G (GSM) systems.

5G NR technology has set a new standard for wireless, opening up the spectrum above 6 GHz that has been previously unusable by cellular services.

(.pdf, 254K | Downloaded 5 times)

Today, we talk about the wired and wireless IoT Communication Technologies, the simple 13 common communication technologies in IoT.

We have compiled and summarized the commonly used wired and wireless communication methods of IoT for future reference.

Communication frequency band: license-free frequency band. Use Industrial Scientific Medical (ISM) frequency band, 915MHz (U.S.), 868MHz (Europe), 2. 4GHz (Global)

NB-IoT is built on a cellular network and only consumes about 180KHz of bandwidth, and can be directly deployed on a GSM network, UMTS network, or LTE network.

Communication frequency band: ISM frequency band including 433MHz, 868MHz, 915MHz, etc.

Communication distance: 2-5 km for towns, 15 km for suburbs

(.pdf, 382K | Downloaded 5 times)

Sub 6G VS mmWave

Edit setfor Sub 6G VS mmWave

This article mainly discusses Sub 6G VS mmWave, the new antenna technologies for 5G millimeter-wave, and 5G Sub-6G applications.

What are the new antenna technologies for 5G? 5G has a 5G millimeter wave and a 5G Sub-6G.

Antenna process

2G mobile phones have one antenna, a single transmitter, and a single receiver. Beginning with 3G, some mobile phones are the same as 2G, while the other 3G mobile phones have started with single transmission and dual reception.

Starting from 4G, all mobile phones have been upgraded to a single transmitter and dual receiver design. We call the two receiving antennas the main antenna and the diversity antenna.

Two independent antenna radiators need to be designed, corresponding to two sets of receiving loops at the receiving end, so the RF cost of 4G mobile phones is also much higher than that of 2/3G mobile phones.

Today, we talk about something about NB-IoT which you may not know.

NB-IoT refers to Narrow Band - Internet of Things (IoT) technology, which focuses on the Low Power Wide Area (LPWA) Internet of Things (IoT) market and is an emerging technology that can be widely used around the world.

Huawei, as the domestic leader in developing NB-IoT technology, has also attracted considerable attention from the technology community.

Q: How are the frequency bands for NB-IoT divided by domestic and international operators?

A: Most operators worldwide use the 900MHz band to deploy NB-IoT, and some operators deploy in the 800MHz band.

China Unicom's NB-IoT is deployed in the 900MHz and 1800MHz bands, and currently, only 900MHz is available for trials.

(.pdf, 286K | Downloaded 7 times)

NB-IoT and LoRa account for 83% share of LPWAN market, low-power satellite IoT becomes a game-breaker, In-depth analysis of low-power wide-area (LPWAN) market in 2021.

According to the monitoring of IoT Analytics, in the second quarter and the third quarter of many countries because of the epidemic quarantine, the number NB-IoT and LoRa of LPWAN-enabled device activation in 2020 still reached 450 million units, with a year-on-year growth rate of 62%, especially in the epidemic prevention and control and supply chain visualization play an important role in the rapid growth of IoT applications;

(.pdf, 312K | Downloaded 7 times)

Due to its wireless transmission characteristics, the adoption of RFID technology in logistics supply chain scenarios can bring a number of benefits. Here have 5 benefits of RFID in logistics supply chain.

Not only can it significantly improve efficiency, but it also opens a new window of digital information management. In general, the application of RFID technology in the logistics supply chain can bring the following benefits.

(.pdf, 275K | Downloaded 7 times)

The common wired and wireless communication technologies in IoT include RS-232, RS-485, USB, Z-Wave, IPv6, Wi-Fi, Bluetooth, Lora, NB-IoT, NFC, RF, GSM, 3G 4G, etc.

With the progress and development of the times, society gradually enters the Internet +, various sensors collect data more and more abundantly, big data applications follow, and people consider incorporating various devices directly into the Internet to facilitate data collection, management as well as analysis and calculation.

IoT intelligence is no longer limited to small devices and small network stages but has entered the complete field of intelligent industrialization. Intelligent IoTisation steps into maturity on big data, cloud computing, and virtual reality, and is incorporated into the whole big ecological environment of the Internet+.

(.pdf, 304K | Downloaded 3 times)

5G Antenna Array Architecture

Edit setfor 5G Antenna Array Architecture

This article discusses the high-level design principles behind 5G antenna array architecture MIMO and beamforming technology to meet the requirements of 5G NR systems.

The higher the carrier frequency, the path loss will increase significantly relative to the fixed antenna size of the wavelength. A smaller antenna size at a higher carrier frequency means that more antennas are installed in the same area.

The path loss caused by the increase in carrier frequency can be overcome by using more antennas without increasing the overall physical size of the 5G antenna array.

In addition, when the carrier frequency increases above about 10 GHz, diffraction will no longer be the main propagation mechanism. Above 10Ghz, reflection and scattering will be the most important transmission mechanisms for non-line-of-sight transmission links.

Despite the hype of 5G NR, Wi-Fi and 5GNR together play an important role in corporate use cases such as remote patient care and smart manufacturing. How 5G Enhances WiFi in the industries?

5G new radio is a very new technology. In addition to faster speeds, when 5G is actually implemented.

The dramatic claim that New 5G will replace WiFi is unfounded to New Radio 5G? It doesn't work today.

Few industries are as affected by 5G as manufacturing. In the manufacturing industry, the advent of cellular technology could stimulate the next industrial revolution.

Most factories continue to operate on Wi-Fi networks, but the wave of smart factories based on 5G technology is beginning to emerge. 

(.pdf, 267K | Downloaded 8 times)

Despite the hype of 5G NR, Wi-Fi and 5GNR together play an important role in corporate use cases such as remote patient care and smart manufacturing. How 5G Enhances WiFi in the industries?

5G new radio is a very new technology. In addition to faster speeds, when 5G is actually implemented.

The dramatic claim that New 5G will replace WiFi is unfounded to New Radio 5G? It doesn't work today. Plant Protein Powder

Few industries are as affected by 5G as manufacturing. In the manufacturing industry, the advent of cellular technology could stimulate the next industrial revolution.

Most factories continue to operate on Wi-Fi networks, but the wave of smart factories based on 5G technology is beginning to emerge. 

(.pdf, 267K | Downloaded 4 times)

Today, we talk about the wired and wireless IoT Communication Technologies, the simple 13 common communication technologies in IoT.

We have compiled and summarized the commonly used wired and wireless communication methods of IoT for future reference.

Communication frequency band: license-free frequency band. Use Industrial Scientific Medical (ISM) frequency band, 915MHz (U.S.), 868MHz (Europe), 2. 4GHz (Global)

NB-IoT is built on a cellular network and only consumes about 180KHz of bandwidth, and can be directly deployed on a GSM network, UMTS network, or LTE network.

Communication frequency band: ISM frequency band including 433MHz, 868MHz, 915MHz, etc.

Communication distance: 2-5 km for towns, 15 km for suburbs

(.pdf, 382K | Downloaded 5 times)

Today, we talk about the several major benefits of NFC smart homes. Guess what are the benefits of NFC smart homes?

For applications in the era of interconnected smart homes, NFC technology can increase the ease of use, safety, etc. of equipment, and can greatly change the lifestyle of our daily homes.

As a short-field communication technology, NFC has a very wide range of applications, such as mobile payment, channel inspection, automobiles, smart homes, industrial control, and so on. With the continuous evolution of smart home scenarios, a large part of NFC devices will appear in the living room in the future.

(.pdf, 350K | Downloaded 6 times)

Today, we talk about something about NB-IoT which you may not know.

NB-IoT refers to Narrow Band - Internet of Things (IoT) technology, which focuses on the Low Power Wide Area (LPWA) Internet of Things (IoT) market and is an emerging technology that can be widely used around the world.

Huawei, as the domestic leader in developing NB-IoT technology, has also attracted considerable attention from the technology community.

Q: How are the frequency bands for NB-IoT divided by domestic and international operators?

A: Most operators worldwide use the 900MHz band to deploy NB-IoT, and some operators deploy in the 800MHz band.

China Unicom's NB-IoT is deployed in the 900MHz and 1800MHz bands, and currently, only 900MHz is available for trials.

(.pdf, 286K | Downloaded 6 times)

NB-IoT and LoRa account for 83% share of LPWAN market, low-power satellite IoT becomes a game-breaker, In-depth analysis of low-power wide-area (LPWAN) market in 2021.

According to the monitoring of IoT Analytics, in the second quarter and the third quarter of many countries because of the epidemic quarantine, the number NB-IoT and LoRa of LPWAN-enabled device activation in 2020 still reached 450 million units, with a year-on-year growth rate of 62%, especially in the epidemic prevention and control and supply chain visualization play an important role in the rapid growth of IoT applications;

(.pdf, 312K | Downloaded 6 times)

What is an RFID warehouse management system?

RFID warehouse management system is a combination of RFID technology and warehouse management system to provide enterprises with a new storage model, to meet the needs of enterprise automation, transparency, intelligent storage, RFID technology, and warehouse management system to achieve a seamless docking, maximize the value of RFID technology applications in warehousing.

(.pdf, 269K | Downloaded 9 times)

The common wired and wireless communication technologies in IoT include RS-232, RS-485, USB, Z-Wave, IPv6, Wi-Fi, Bluetooth, Lora, NB-IoT, NFC, RF, GSM, 3G 4G, etc.

With the progress and development of the times, society gradually enters the Internet +, various sensors collect data more and more abundantly, big data applications follow, and people consider incorporating various devices directly into the Internet to facilitate data collection, management as well as analysis and calculation.

IoT intelligence is no longer limited to small devices and small network stages but has entered the complete field of intelligent industrialization. Intelligent IoTisation steps into maturity on big data, cloud computing, and virtual reality, and is incorporated into the whole big ecological environment of the Internet+.

(.pdf, 304K | Downloaded 4 times)

The new 5G and massive MIMO are everywhere. What can the 5G massive MIMO bring to our life?

With the continuous progress of information technology, digitalization, and big data, the development of antenna technology also has higher requirements, and the communication system keeps developing to the higher frequency band and larger bandwidth.

Looking back to the radio communication technology, from the 1895 Italian scientist Marconi, the first wireless telegram is filled with the other side of the ocean. It has already passed more than 120 years in social life, aerospace, military, etc. Radio communications technology has played an irreplaceable role.

(.pdf, 343K | Downloaded 5 times)

What is the ISM band and what are the main frequencies in the ISM band? After the read, you will get the answer.

This frequency range for 430.050 ~ 434.790MHz, in the world range.

This frequency range is from 868 to 870 MHz, in the UHF band. 

ISM Band Frequency 915 MHz

In the United States and Australia, the frequency range 888 to 889 MHz and 902 to 928 MHz has been available and used by the backscatter RFID system.

ISM Band Frequency 2.4 GHz

This ISM band frequency range is 2.400 ~ 2.483GHz, belongs to the microwave band.

ISM applications in this band include Bluetooth and 802.11 protocol wireless networks.

Microwave / Bluetooth / WIFI, etc. are used in this frequency, in addition to domestic RFID also uses this frequency.

ISM Band Frequency 5.8GHz

This ISM frequency range is 5.725 ~ 5.875GHz.

 

(.docx, 19K | Downloaded 3 times)

The new 5G and massive MIMO are everywhere. What can the 5G massive MIMO bring to our life?

With the continuous progress of information technology, digitalization, and big data, the development of antenna technology also has higher requirements, and the communication system keeps developing to the higher frequency band and larger bandwidth.

Looking back to the radio communication technology, from the 1895 Italian scientist Marconi, the first wireless telegram is filled with the other side of the ocean. It has already passed more than 120 years in social life, aerospace, military, etc. Radio communications technology has played an irreplaceable role.

(.pdf, 343K | Downloaded 4 times)

What is the ISM band and what are the main frequencies in the ISM band? After the read, you will get the answer.

This frequency range for 430.050 ~ 434.790MHz, in the world range.

This frequency range is from 868 to 870 MHz, in the UHF band. 

ISM Band Frequency 915 MHz

In the United States and Australia, the frequency range 888 to 889 MHz and 902 to 928 MHz has been available and used by the backscatter RFID system.

ISM Band Frequency 2.4 GHz

This ISM band frequency range is 2.400 ~ 2.483GHz, belongs to the microwave band.

ISM applications in this band include Bluetooth and 802.11 protocol wireless networks.

Microwave / Bluetooth / WIFI, etc. are used in this frequency, in addition to domestic RFID also uses this frequency.

ISM Band Frequency 5.8GHz

This ISM frequency range is 5.725 ~ 5.875GHz.

(.pdf, 297K | Downloaded 2 times)

The common wired and wireless communication technologies in IoT include RS-232, RS-485, USB, Z-Wave, IPv6, Wi-Fi, Bluetooth, Lora, NB-IoT, NFC, RF, GSM, 3G 4G, etc.

With the progress and development of the times, society gradually enters the Internet +, various sensors collect data more and more abundantly, big data applications follow, and people consider incorporating various devices directly into the Internet to facilitate data collection, management as well as analysis and calculation.

IoT intelligence is no longer limited to small devices and small network stages but has entered the complete field of intelligent industrialization. Intelligent IoTisation steps into maturity on big data, cloud computing, and virtual reality, and is incorporated into the whole big ecological environment of the Internet+.

(.pdf, 304K | Downloaded 4 times)

The cellular IoT is a method of connecting physical devices (sensors, etc.) to the Internet, and transmits physical devices (sensors, etc.) on the same mobile network as smartphones.

The cellular network connects IoT devices will exceed 20 billion in 2023. Specifically, the number of IoT devices connected via LTE and 5G exceeds 3.5 billion, mainly in China and Northeast Asia.

Two major forms of cellular Internet of Things: LTE-M and NB-IoT

In fact, all current cellular IoT applications use either LTE-M or NB-IoT or GSM cellular infrastructure.

While only the United States, the Netherlands, Ireland, and Australia cover national LTE, GSM has become the norm in many non-Western regions such as Eastern Europe and Africa.

(.pdf, 281K | Downloaded 6 times)

What is narrowband internet of things technology? Why is the narrowband internet of things technology emerging?

What is narrowband internet of things technology?

NB-IoT refers to NarrowBand Internet of Things (Narrowband-IoT) technology. Different IoT services have different requirements for data transmission capability and real-time performance.

Depending on the transmission rate, IoT services can be differentiated into high, medium, and low speed:

High-speed IoT services:

Mainly using 3G and 4G technologies, such as in-vehicle IoT devices and surveillance cameras, the corresponding business features require real-time data transmission;

(.pdf, 256K | Downloaded 3 times)

After reading, you will learn what is an IoT antenna, what are the IoT antenna types.

Internet of Things (IoT) devices need to have an antenna. The smaller the IoT device space, the more the frequency band and the more complex IoT antenna design. Internet of Things/IoT antenna includes NB-IoT antenna, 4G antenna, 5G antenna, GSM antenna, Lora antenna, GPRS antenna, UMTS antenna, Lora antenna, ISM antenna, GNSS antenna, WiFi antenna, GPS antenna, etc.

(.pdf, 289K | Downloaded 5 times)

The cellular IoT is a method of connecting physical devices (sensors, etc.) to the Internet, and transmits physical devices (sensors, etc.) on the same mobile network as smartphones.

The cellular network connects IoT devices will exceed 20 billion in 2023. Specifically, the number of IoT devices connected via LTE and 5G exceeds 3.5 billion, mainly in China and Northeast Asia.

Two major forms of cellular Internet of Things: LTE-M and NB-IoT

In fact, all current cellular IoT applications use either LTE-M or NB-IoT or GSM cellular infrastructure.

While only the United States, the Netherlands, Ireland, and Australia cover national LTE, GSM has become the norm in many non-Western regions such as Eastern Europe and Africa.

(.pdf, 281K | Downloaded 4 times)

What is narrowband internet of things technology? Why is the narrowband internet of things technology emerging?

What is narrowband internet of things technology?

NB-IoT refers to NarrowBand Internet of Things (Narrowband-IoT) technology. Different IoT services have different requirements for data transmission capability and real-time performance.

Depending on the transmission rate, IoT services can be differentiated into high, medium, and low speed:

High-speed IoT services:

Mainly using 3G and 4G technologies, such as in-vehicle IoT devices and surveillance cameras, the corresponding business features require real-time data transmission;

(.pdf, 256K | Downloaded 8 times)

After reading, you will learn what is an IoT antenna, what are the IoT antenna types.

Internet of Things (IoT) devices need to have an antenna. The smaller the IoT device space, the more the frequency band and the more complex IoT antenna design. Internet of Things/IoT antenna includes NB-IoT antenna, 4G antenna, 5G antenna, GSM antenna, Lora antenna, GPRS antenna, UMTS antenna, Lora antenna, ISM antenna, GNSS antenna, WiFi antenna, GPS antenna, etc.

(.pdf, 289K | Downloaded 5 times)

The cellular IoT is a method of connecting physical devices (sensors, etc.) to the Internet, and transmits physical devices (sensors, etc.) on the same mobile network as smartphones.

The cellular network connects IoT devices will exceed 20 billion in 2023. Specifically, the number of IoT devices connected via LTE and 5G exceeds 3.5 billion, mainly in China and Northeast Asia.

Two major forms of cellular Internet of Things: LTE-M and NB-IoT

In fact, all current cellular IoT applications use either LTE-M or NB-IoT or GSM cellular infrastructure.

While only the United States, the Netherlands, Ireland, and Australia cover national LTE, GSM has become the norm in many non-Western regions such as Eastern Europe and Africa.

(.pdf, 281K | Downloaded 5 times)

What is narrowband internet of things technology? Why is the narrowband internet of things technology emerging?

What is narrowband internet of things technology?

NB-IoT refers to NarrowBand Internet of Things (Narrowband-IoT) technology. Different IoT services have different requirements for data transmission capability and real-time performance.

Depending on the transmission rate, IoT services can be differentiated into high, medium, and low speed:

High-speed IoT services:

Mainly using 3G and 4G technologies, such as in-vehicle IoT devices and surveillance cameras, the corresponding business features require real-time data transmission;

(.pdf, 256K | Downloaded 4 times)

After reading, you will learn what is an IoT antenna, what are the IoT antenna types.

Internet of Things (IoT) devices need to have an antenna. The smaller the IoT device space, the more the frequency band and the more complex IoT antenna design. Internet of Things/IoT antenna includes NB-IoT antenna, 4G antenna, 5G antenna, GSM antenna, Lora antenna, GPRS antenna, UMTS antenna, Lora antenna, ISM antenna, GNSS antenna, WiFi antenna, GPS antenna, etc.

(.pdf, 289K | Downloaded 5 times)

After the read, you will learn about what is NB-IoT, What are the features of NarrowBand-IoT, what are the NB-IoT applications.

NB-IoT (NarrowBand Internet of Things) is an emerging technology IoT based on the narrowband cellular things, support low-power device is connected to the cellular WAN data, is also known as a low-power wide-area network ( LPWA).

The GSM network, UMTS network, or an LTE network supporting short standby time, the network connection device requires a high connection efficiency.

(.pdf, 323K | Downloaded 3 times)

the 7 newest UWB industry trends to reveal how UWB technology future gFrom oes.

(.pdf, 239K | Downloaded 4 times)

What is integrated positioning technology?

The integrated positioning technology integrates all positioning methods on the market, including GPS, base station positioning, Wi-Fi positioning, Bluetooth positioning, and sensor positioning, which can be described as integrated positioning technology sets.

(.pdf, 272K | Downloaded 4 times)

After the read, you will learn about what is NB-IoT, What are the features of NarrowBand-IoT, what are the NB-IoT applications.

NB-IoT (NarrowBand Internet of Things) is an emerging technology IoT based on the narrowband cellular things, support low-power device is connected to the cellular WAN data, is also known as a low-power wide-area network ( LPWA).

The GSM network, UMTS network, or an LTE network supporting short standby time, the network connection device requires a high connection efficiency.

(.pdf, 323K | Downloaded 3 times)

the 7 newest UWB industry trends to reveal how UWB technology future gFrom oes.

(.pdf, 239K | Downloaded 4 times)

What is integrated positioning technology?

The integrated positioning technology integrates all positioning methods on the market, including GPS, base station positioning, Wi-Fi positioning, Bluetooth positioning, and sensor positioning, which can be described as integrated positioning technology sets.

(.pdf, 272K | Downloaded 4 times)

After the read, you will learn about what is NB-IoT, What are the features of NarrowBand-IoT, what are the NB-IoT applications.

NB-IoT (NarrowBand Internet of Things) is an emerging technology IoT based on the narrowband cellular things, support low-power device is connected to the cellular WAN data, is also known as a low-power wide-area network ( LPWA).

The GSM network, UMTS network, or an LTE network supporting short standby time, the network connection device requires a high connection efficiency.

(.pdf, 323K | Downloaded 4 times)

the 7 newest UWB industry trends to reveal how UWB technology future gFrom oes.

(.pdf, 239K | Downloaded 3 times)

What is integrated positioning technology?

The integrated positioning technology integrates all positioning methods on the market, including GPS, base station positioning, Wi-Fi positioning, Bluetooth positioning, and sensor positioning, which can be described as integrated positioning technology sets.

(.pdf, 272K | Downloaded 4 times)

There are many types of wireless communication technologies in the IoT, such as Wifi, Lora, NB-IoT, Bluetooth, ZigBee, Sigfox, etc.

What is wireless communication technology?

Wireless communication technology transmits information over the air using electromagnetic waves like IR (Infrared), RF (Radio Frequency), satellite, etc. For example, GPS, Wi-Fi, satellite television, wireless computer parts, wireless phones that include 3G and 4G networks, and Bluetooth

(.pdf, 275K | Downloaded 2 times)

Regarding the performance of active vs passive GPS antenna, both GPS passive antennas and active GPS antennas can receive GPS signals and achieve the satellite positioning function. But usually, the GPS active antenna is better than the passive GPS antenna, and the positioning speed active vs passive GPS antenna is faster.

From the antenna placement, GPS antenna can be divided into built-in antenna and external antenna; and GPS built-in antenna can be divided into the active and passive antenna.

(.pdf, 336K | Downloaded 1 times)

As intelligent transport systems for smart cities begin to evolve, people can take advantages of intelligent transport systems for the many safety, efficiency, and cost benefits.

These new prospects are largely due to the expansion of IoT devices and 5G connectivity technologies.

(.pdf, 276K | Downloaded 1 times)

How Much Does The Wall Thickness Of Plastic Parts Affect The Quality?

Edit setfor How Much Does The Wall Thickness Of Plastic Parts Affect The Quality?

The wall thickness of plastic parts processing has a great influence on quality. If the wall thickness is too small, the flow resistance is large, and it is difficult for large and complex plastic parts to fill the cavity. The minimum size of the processed wall thickness of plastic parts should meet the following requirements:

1. Have sufficient strength and rigidity;

2. It can withstand the impact and vibration of the demolding mechanism during demolding;

3. It can withstand the tightening force during assembly.

The injection molding factory stipulates a minimum wall thickness value, which varies due to the variety, brand, and size of plastic parts. gilarpost.com Excessive wall thickness in the processing of plastic parts is not only a waste of raw materials.

Plumbers that assist with a water supply and wastewater drainage systems for businesses, public areas, building complexes, and high rises are known as commercial plumbers. Commercial plumbing is substantially more difficult than domestic plumbing because of the extensive and technical nature of the task.

Commercial plumbers are in charge of managing and repairing many of these systems on a regular basis. Depending on their skill level and training, their scope of labor is virtually unlimited. They can be found fishing in public restrooms, wading through flooded basements, replacing broken school fixtures, repairing water pumps, and a variety of options.

 

 

 

 

 

Electric Cycle

(.html, 129K | Downloaded 21 times)

5G Supports Passive IoT

Edit setfor 5G Supports Passive IoT

Passive IoT technology can indeed cover hundreds of billions of IoT nodes.

This requires 5G networks to support IoT types with different speed gears to match the differentiated needs of the industry;

In addition, a large number of current IoT applications are based on passive connections.

The cellular network’s support for the Internet of Things is mainly divided into three different speed gears, namely high-speed IoT, medium-speed IoT, and narrowband IoT. The high-speed IoT is mainly carried by 4G Cat.4+ and 5G eMBB. Suwulian is currently mainly carried by 4G Cat.1, and narrowband IoT is mainly carried by NB-IoT.

NB-IoT and LoRa account for 83% share of LPWAN market, low-power satellite IoT becomes a game-breaker, In-depth analysis of low-power wide-area (LPWAN) market in 2021.

According to the monitoring of IoT Analytics, in the second quarter and the third quarter of many countries because of the epidemic quarantine, the number NB-IoT and LoRa of LPWAN-enabled device activation in 2020 still reached 450 million units, with a year-on-year growth rate of 62%, especially in the epidemic prevention and control and supply chain visualization play an important role in the rapid growth of IoT applications;

(.pdf, 312K | Downloaded 7 times)

Due to its wireless transmission characteristics, the adoption of RFID technology in logistics supply chain scenarios can bring a number of benefits. Here have 5 benefits of RFID in logistics supply chain.

Not only can it significantly improve efficiency, but it also opens a new window of digital information management. In general, the application of RFID technology in the logistics supply chain can bring the following benefits.

(.pdf, 275K | Downloaded 8 times)

5G And The Internet Of Things

Edit setfor 5G And The Internet Of Things

By integrating 5G and the Internet of Things networks, manufacturers can operate with full flexibility and move towards a dynamic ecosystem of suppliers and consumers.

There is no doubt that 5G mobile networks will be a giant leap forward for mobile broadband. The IoT offers many advantages for 5G in healthcare, education, energy, and transportation. According to recent research, approximately 500 billion IoT tools, including sensors, medical devices, and actuators, will be connected to the Internet.

Today, we talk about something about NB-IoT which you may not know.

NB-IoT refers to Narrow Band - Internet of Things (IoT) technology, which focuses on the Low Power Wide Area (LPWA) Internet of Things (IoT) market and is an emerging technology that can be widely used around the world.

Huawei, as the domestic leader in developing NB-IoT technology, has also attracted considerable attention from the technology community.

Q: How are the frequency bands for NB-IoT divided by domestic and international operators?

A: Most operators worldwide use the 900MHz band to deploy NB-IoT, and some operators deploy in the 800MHz band.

China Unicom's NB-IoT is deployed in the 900MHz and 1800MHz bands, and currently, only 900MHz is available for trials.

(.pdf, 286K | Downloaded 6 times)

RFID Warehouse Management System

Edit setfor RFID Warehouse Management System

What is an RFID warehouse management system?

RFID warehouse management system is a combination of RFID technology and warehouse management system to provide enterprises with a new storage model, to meet the needs of enterprise automation, transparency, intelligent storage, RFID technology, and warehouse management system to achieve a seamless docking, maximize the value of RFID technology applications in warehousing.

What is an RFID warehouse management system?

RFID warehouse management system is a combination of RFID technology and warehouse management system to provide enterprises with a new storage model, to meet the needs of enterprise automation, transparency, intelligent storage, RFID technology, and warehouse management system to achieve a seamless docking, maximize the value of RFID technology applications in warehousing.

(.pdf, 269K | Downloaded 6 times)

LTE Cat 1 vs Cat 4

Edit setfor LTE Cat 1 vs Cat 4

Today, we talk about the LTE Cat 1 vs Cat 4. After the read, you will know about the difference between LTE Cat.1 and Cat.4.

The LTE Cat.1 and Cat.4 in LTE networks for 4G communications.

Cat.1 in LTE Cat 1 vs Cat 4 is a 4G LTE network category, which can be called a low version of 4G terminal with 5Mbit/s uplink peak rate and 10Mbit/s downlink peak rate, and belongs to cellular IoT, a wide area network.

Cat1 in LTE Cat 1 vs Cat 4 supports the low and medium rate IoT market together with NB-IoT with its advantages of low cost and low power consumption.

Today, we talk about the LTE Cat 1 vs Cat 4. After the read, you will know about the difference between LTE Cat.1 and Cat.4.

To distinguish between LTE Cat.1 and Cat.4, we need to know what Cat is. Cat stands for Category, and the numbers after Cat represent the different categories, which 3GPP names in the Cat.

Cat.X is used to describe the capability level of user terminals according to the 3GPP Release definition, and Cat4 and Cat1 are both standards for user terminal categories in LTE networks for 4G communications.

(.pdf, 257K | Downloaded 8 times)

Today, we talk about the LTE Cat 1 vs Cat 4. After the read, you will know about the difference between LTE Cat.1 and Cat.4.

To distinguish between LTE Cat.1 and Cat.4, we need to know what Cat is. Cat stands for Category, and the numbers after Cat represent the different categories, which 3GPP names in the Cat.

Cat.X is used to describe the capability level of user terminals according to the 3GPP Release definition, and Cat4 and Cat1 are both standards for user terminal categories in LTE networks for 4G communications.

(.pdf, 257K | Downloaded 8 times)

What is Mold Clamp?

Edit setfor What is Mold Clamp?

Mold clamp tools definition

What is mold clamp? The mold clamp (also called mould clamp) is a kind of auxiliary clamping unit often used in injection mold processing, its main function is to keep the machined parts not shaking not moving in the processing.

Mold clamp tools definition

What is mold clamp? The mold clamp (also called mould clamp) is a kind of auxiliary clamping unit often used in injection mold processing, its main function is to keep the machined parts not shaking not moving in the processing.

(.pdf, 1164K | Downloaded 6 times)

Mold clamp tools definition

What is mold clamp? The mold clamp (also called mould clamp) is a kind of auxiliary clamping unit often used in injection mold processing, its main function is to keep the machined parts not shaking not moving in the processing.

(.pdf, 1164K | Downloaded 7 times)